一、menuconig配置

Device Drivers

----------->Graphics support

------>Frame buffer Devices
------>Support for frame buffer devices  --->    

--->Solomon SSD1306 framebuffer support

二、修改设备树

&i2c3 {
        clock-frequency = <400000>;
        pinctrl-names = "default";
        status = "okay";
        ssd1306: oled@3c {
                compatible = "solomon,ssd1306fb-i2c";
                reg = <0x3c>;
                //pwms = <&pwm 4 3000>;
                //reset-gpios = <&gpio2 7>;
                solomon,width = <128>;
                solomon,height = <64>;
                solomon,page-offset = <0>;
                //solomon,com-lrremap;
                solomon,com-invdir;
                //solomon,com-offset = <0>;
                //solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
        };
};