Environment size: 1420/4092 bytes
S5000C#
arch=arm
baudrate=115200
board=s5000c
board_name=s5000c
boot_fdt=booti 0x90000000 - 0x95000000
boot_usb_fdt=booti 0x90000000 - 0x95000000
bootargs=console=ttyAMA1,115200 earlycon=pl011,0x20001000 root=/dev/sda2 rootdelay=10 rw
bootcmd=run distro_bootcmd
bootdelay=3
cpu=armv8
distro_bootcmd=run load_kernel; run load_fdt; run boot_fdt
ethaddr=11:22:33:44:55:66
ext4_read_check=ext4load scsi 0:1 0x92000000 file_bake.txt
ext4_read_test=ext4load scsi 0:1 0x90000000 dtb/ft2004.dtb
ext4_write_test=ext4write scsi 0:1 0x90000000 /file_bake.txt 0x2DA8
fat_read_check=fatload usb 0:1 0x92000000 file_bake.txt
fat_read_test=fatload usb 0:1 0x90000000 md5sum.txt
fat_write_test=fatwrite usb 0:1 0x90000000 /file_bake.txt 0x5D4A
fdtcontroladdr=f9b40a70
fileaddr=95000000
filesize=87b7
gatewayip=192.168.1.1
ipaddr=192.168.1.250
load_fdt=ext4load scsi 0:1 0x95000000 s5000c-64c.dtb
load_kernel=ext4load scsi 0:1 0x90000000 Image
load_usb_fdt=fatload usb 0:1 0x95000000 s5000c-64c.dtb
load_usb_kernel=fatload usb 0:1 0x90000000 Image
loadaddr=0x90000000
netmask=255.255.255.0
serverip=192.168.1.110
soc=s5000c
start_autoscript=if usb start; then run start_usb_autoscript; fi; if scsi info; then run start_ssd_autoscript; fi;
start_ssd_autoscript=run load_kernel; run load_fdt; run boot_fdt
start_usb_autoscript=run load_usb_kernel; run load_usb_fdt; run boot_usb_fdt
stderr=serial
stdin=serial,usbkbd
stdout=serial
vendor=phytium